Quick cpu 3 1 3 0

Author: c | 2025-04-24

oliver$ ./stress -cpu 3 stress: info: [ ] dispatching hogs: 3 cpu, 0 io, 0 vm, 0 hdd Share. Improve this answer. Follow edited at . Community Bot. 1.

0 0 0 3 5 4 0 0 1 3 3 4 4 0 0 0 0 3 3 3 1 0 3 6 1 0 0 - fill-a

Around and let see if someone else use the same board and could confirm your readings . #7 all the temp are good this auxiliary must be the same thing i have with another name that show -128 c on my system , stay around and let see if someone else use the same board and could confirm your readings . OK, thanks...My Motherboard is an ASUS P8H61-M Pro. Feb 18, 2010 30,587 324 107,640 #8 nice little board you could do some overclock with her . #9 I'm quite worried about my Temperature #1 reading. And since you were waiting for somebody with a similar system I thought I'd post:+- ASUS P8Z68-V LX (/mainboard)| +- Nuvoton NCT6776F (/lpc/nct6776f)| | +- Temperature #1 : 78.5 26.5 86 (/lpc/nct6776f/temperature/1)| | +- Temperature #2 : 56 50.5 59 (/lpc/nct6776f/temperature/2)| | +- Temperature #3 : 32 30 32 (/lpc/nct6776f/temperature/3)|+- Intel Core i7-2600K (/intelcpu/0)| +- CPU Core #1 : 41 38 65 (/intelcpu/0/temperature/0)| +- CPU Core #2 : 41 38 68 (/intelcpu/0/temperature/1)| +- CPU Core #3 : 40 37 65 (/intelcpu/0/temperature/2)| +- CPU Core #4 : 35 31 58 (/intelcpu/0/temperature/3)| +- CPU Package : 41 38 68 (/intelcpu/0/temperature/4)|+- NVIDIA GeForce GTX 570 (/nvidiagpu/0)| +- GPU Core : 54 54 57 (/nvidiagpu/0/temperature/0)Any ideas / opinions guys? Feb 18, 2010 30,587 324 107,640 #10 your on stock cooler i would suggest to use after market one for the cpu like the evo 212 and mx2 or mx4 as cooling paste they do not need cure time . #11 I have similar temperatures, no problems so far:|+- ASUS P8H67-M PRO (/mainboard)| || +- Nuvoton NCT6776F (/lpc/nct6776f)| | +- CPU Core : 47.5 45.5 50 (/lpc/nct6776f/temperature/0)| | +- Temperature #1 : 73.5 50.5 83 (/lpc/nct6776f/temperature/1)| | +- Temperature #2 : 90.5 88 96 (/lpc/nct6776f/temperature/2)| | +- Temperature #3 : 37 37 38 (/lpc/nct6776f/temperature/3)|+- Intel Core i5-2400 (/intelcpu/0)| +- CPU Core #1 : 53 49 59 (/intelcpu/0/temperature/0)| +- CPU Core #2 : 54 52 61 (/intelcpu/0/temperature/1)| +- CPU Core #3 : 55 51 59 (/intelcpu/0/temperature/2)| +- CPU Core #4 : 53 49 58 (/intelcpu/0/temperature/3)| +- CPU Package : 58 55 61 (/intelcpu/0/temperature/4)+- NVIDIA GeForce GTX 570 (/nvidiagpu/0)| +- GPU Core : 59 58 60 (/nvidiagpu/0/temperature/0)I looked for the data sheet of the chip and the specifications say the operating temperature is T = 0°C to +70°C (well, we're 20 degrees over! )Storage temperature -55 to +150°CSource: page 416 Advertising Cookies Policies Privacy Term & Conditions Topics Flag in config.mk needs to changed to GCCARMv8 or ARMCLANG (experimental).For POWER builds, the COMPILER flag in config.mk needs to changed to GCCPOWER or XLC (experimental).For Nvidia GPU support, set NVIDIA_INTERFACE in config.mk to true and adjust build-time variables if neededFor AMD GPU support, set ROCM_INTERFACE in config.mk to true and adjust build-time variables if neededUsage exampleslikwid-topology--------------------------------------------------------------------------------CPU name: Intel(R) Core(TM) i7-6700K CPU @ 4.00GHzCPU type: Intel Skylake processorCPU stepping: 3********************************************************************************Hardware Thread Topology********************************************************************************Sockets: 1Cores per socket: 4Threads per core: 2--------------------------------------------------------------------------------HWThread Thread Core Die Socket Available0 0 0 0 0 * 1 0 1 0 0 * 2 0 2 0 0 * 3 0 3 0 0 * 4 1 0 0 0 * 5 1 1 0 0 * 6 1 2 0 0 * 7 1 3 0 0 * --------------------------------------------------------------------------------Socket 0: ( 0 4 1 5 2 6 3 7 )--------------------------------------------------------------------------------********************************************************************************Cache Topology********************************************************************************Level: 1Size: 32 kBCache groups: ( 0 4 ) ( 1 5 ) ( 2 6 ) ( 3 7 )--------------------------------------------------------------------------------Level: 2Size: 256 kBCache groups: ( 0 4 ) ( 1 5 ) ( 2 6 ) ( 3 7 )--------------------------------------------------------------------------------Level: 3Size: 8 MBCache groups: ( 0 4 1 5 2 6 3 7 )--------------------------------------------------------------------------------********************************************************************************NUMA Topology********************************************************************************NUMA domains: 1--------------------------------------------------------------------------------Domain: 0Processors: ( 0 4 1 5 2 6 3 7 )Distances: 10Free memory: 318.203 MBTotal memory: 7626.23 MB--------------------------------------------------------------------------------likwid-perfctr$ likwid-perfctr -C 0 -g L2 hostname--------------------------------------------------------------------------------CPU name: Intel(R) Core(TM) i7-6700K CPU @ 4.00GHzCPU type: Intel Skylake processorCPU clock: 4.01 GHz--------------------------------------------------------------------------------mytesthost--------------------------------------------------------------------------------Group 1: L2+-----------------------+---------+------------+| Event | Counter | HWThread 0 |+-----------------------+---------+------------+| INSTR_RETIRED_ANY | FIXC0 | 321342 || CPU_CLK_UNHALTED_CORE | FIXC1 | 450498 || CPU_CLK_UNHALTED_REF | FIXC2 | 1118900 || L1D_REPLACEMENT | PMC0 | 6670 || L1D_M_EVICT | PMC1 | 1840 || ICACHE_64B_IFTAG_MISS | PMC2 | 9293 |+-----------------------+---------+------------++--------------------------------+------------+| Metric | HWThread 0 |+--------------------------------+------------+| Runtime (RDTSC) [s] | 0.0022 || Runtime unhalted [s] | 0.0001 || Clock [MHz] | 1613.6392 || CPI | 1.4019 || L2D load bandwidth [MBytes/s] | 197.8326 || L2D load data volume [GBytes] | 0.0004 || L2D evict bandwidth [MBytes/s] | 54.5745 || L2D evict data volume [GBytes] | 0.0001 || L2 bandwidth [MBytes/s] | 528.0381 || L2 data volume [GBytes]

3 Benchmark a CPU 1 1 .docx - 1 3. Benchmark a CPU.

Junior Member Join Date: Mar 2008 Posts: 7 I've changed from Winamp 2.91 to Winamp lite 5.531. I've tested some things. Now I have a few questions.1. Why does in_mp3.dll 4.4 sound different than in_mp3.dll 2.91? I think 4.4 sounds very filtered/worse? I've used the same output plugins for both.(DS, Asio, KS)Things like Equalizer, FL3EQ, Dither, 24bit, etc. are turned off for testing. 2. Why does in_mp3.dll 4.4 use more cpu power than in_mp3.dll 2.91? 3. How is the quality of the new Constant-Q EQ? Does it cut the high frequencies above 16kHz? Spectral Techorator Join Date: Jun 2000 Posts: 36148 1. Probably because the 'Fast Layer 3 EQ' was enabled by default in 2.91 (in_mp3 config -> Decoder tab)2. No idea. It doesn't here. Winamp 5.53 actually uses less cpu for me than 2.x ever did.3. Comment Junior Member Join Date: Mar 2008 Posts: 7 Originally posted by DJ Egg 1. Probably because the 'Fast Layer 3 EQ' was enabled by default in 2.91 (in_mp3 config -> Decoder tab)2. No idea. It doesn't here. Winamp 5.53 actually uses less cpu for me than 2.x ever did.3. 1. FL3EQ was turned off in Winamp 2.91 and 5.53. Are there any new filters in use? It sounds more polished. I don't know yet if I like it or not.2. Very strange. I have a P4 3,2GHz & 2GB Ram.Winamp 2.91 = 0% CPU usageWinamp 2.91 with 4Front EQ = 0% CPU usageWinamp 2.91 with FL3EQ = 0% CPU usageWinamp 5.53 = 0%-2% CPU usageWinamp 5.53 with FL3EQ = 0%-2% CPU usageWinamp 5.53 with Constant-Q EQ = 2%-3% CPU usageWinamp 5.53 with 4Front EQ = 2%-10%! CPU usage (Limiter on/off)Winamp 5.53 with in_mp3.dll 2.91 = 0% CPU usage3. There's nothing written about the quality of Constant-Q EQ. I know it uses different. oliver$ ./stress -cpu 3 stress: info: [ ] dispatching hogs: 3 cpu, 0 io, 0 vm, 0 hdd Share. Improve this answer. Follow edited at . Community Bot. 1.

Middle Buster for CAT 0 1, 3-Point Quick Hitch Tractors with 3

> Access Protection > Enable. If you enable access protection for the first time with this menu command, a dialog opens in which you will need to log on with SIMATIC Logon. You will then be prompted to assign a project password. The relevant project or library can then only be edited by an authenticated user or after entering the project password. Hope this help, do give me your feedback. Suggestion To thank Quote Answer 7/11/2013 5:39 AM Rate (0) Ammy Platinum Member Joined: 4/19/2008 Last visit: 11/21/2024 Posts: 1525 Rating: (159) MHasanDear All,I need to know, how to password protect Step7 v5.5Project (program), so that if i have to open my Project (program) in Step v5.5 i have to put password first before accessing program.I also need to know, how to password protect myplc CPU 416-2 DP (6ES7416-2XN05-0AB00) from uploading/downloading program.Hello MHasan,If you Want to give the Password to the Step 7 Project, then You have to Used the Simatic Logon, (But I have used with PCS7 Project Not Only on Step7, it will used the Windows User)For the CPU Password Go to Hardware Configuration - CPU Properties - Protection Define the 3 Level Password (Read/write). AmmyNew for every one..............“No duty is more urgent than that of returning thanks.”If Problem Solved......!I can't help you privately - please post in the Forums Suggestion To thank Quote Answer 7/11/2013 5:54 AM Rate (0) MHasan Posts: 63 Rating: (4) Dear All,Thanks for your quick helpfull replies.from where simatic log on download is available for step7 v5.5? Suggestion To thank Quote Answer 7/11/2013 5:57 AM Rate (0) SMHZ Bronze Member Joined: 10/19/2012 Last visit: 4/17/2022 Posts: 315 Rating: (9) MHasanDear All,Thanks for your quick helpfull replies.from where simatic log on download is available for step7 v5.5?It is not part of Step 7 & come as an additional software, look at this: Suggestion To thank Quote Answer This contribution was helpful to 1 thankful Users S7 AUTOMAN 7/11/2013 7:03 AM Rate (1) Ayman Elotaify Platinum Expert Joined: 5/28/2008 Last visit: 3/12/2025 Posts: 4518 Rating: (843) MHasanDear All,Thanks for your quick helpfull replies.from where simatic log on download is available for step7 v5.5?Hello MHasan,It's not a free ware to download. Here's bellow link for ordering data: this helps. Ayman Elotaify Suggestion To thank Quote Answer This contribution was helpful to 1 thankful Users hdhosseini Created by: Diniz_ at: 1/27/2018 4:10 PM (10 Replies) Rating (4) Thanks 5 11 Entries Entries per page: 10 | all 1/27/2018 4:10 PM Rate (0) Diniz_ Bronze Member Joined: 7/2/2016 Last visit: 6/18/2024 Posts: 120 Rating: (29) dear experts,is there a way to data exchange between CPU S7-300/400 and SQL database without WinCC ?if yes, how?Step7 - manager hope this help, if it was helpful please rate the post!----BR,Diniz Carvalho Suggestion To thank Quote Answer 1/28/2018 3:15 PM Rate (1) Duris_I Diamond Expert "> Joined: 4/28/2015 Last visit: 2/24/2025 Posts: 10832 Rating: (836) Hello,first one quick solution what I'll be make is create your own 'bridge' application on PC via some high programming language. You can collect via one connection required data from PLC and also exchange data to/from SQL DB. With best regards...Ivan DurisFlight: OMICO Suggestion To thank Quote Answer This contribution was helpful to 1 thankful Users Diniz_ 1/28/2018 3:44 PM Rate (1) Ste39 Platinum Member Joined: 1/21/2013 Last visit: 11/20/2024 Posts: 4620 Rating: (710) Diniz_dear experts,is there a way to data exchange between CPU S7-300/400 and SQL database without WinCC ?if yes, how?Step7 - manager Hello Diniz,please have a look: Where do you procure the firmware extension for the CP 343-1 ERPC ... www.sql4automation.com. OPC Client for ODBC PLC SQL Link Last edited by: Ste39 at: 1/28/2018 3:48:55 PM Suggestion To thank Quote Answer This contribution was helpful to 1 thankful Users Diniz_ 1/28/2018 8:44 PM Rate (0) Diniz_ Bronze Member Joined: 7/2/2016 Last visit: 6/18/2024

Browserbob 3 professional 3 1 0 3 - latashagoodmanpek.magix.net

PC Temperature Monitoring Thread starter Thread starter faridc Start date Start date Jan 1, 2014 You are using an out of date browser. It may not display this or other websites correctly.You should upgrade or use an alternative browser. #1 Hello,I have recently upgraded my PC case to improve airflow.I went from a generic store bought ASUS CM 6730 desktop original mid tower to a Fractal ARC Mini R2. I was able to move all the components and added a couple SSD's successfully. My mobo is an ASUS P8H61-M Pro (original one that came with the generic desktop).I have recently downloaded a temp monitoring software: Open Hardware Monitor ( and been keeping an eye at the temps in different components, it even gives me the temps of my HDD and SSD's.These are the readings I am getting and was wondering whether they are OK:+- ASUS CM6330_CM6630_CM6730_CM6830_M11AA (/mainboard)| +- Nuvoton NCT6776F (/lpc/nct6776f)| | +- CPU Core : 29.5 53.5 (/lpc/nct6776f/temperature/0)| | +- Temperature #1 : 86 87.5 (/lpc/nct6776f/temperature/1)| | +- Temperature #2 : 94.5 98.5 (/lpc/nct6776f/temperature/2)| | +- Temperature #3 : 31 33 (/lpc/nct6776f/temperature/3)+- Intel Core i7-3770 (/intelcpu/0)| +- CPU Core #1 : 27 54 (/intelcpu/0/temperature/0)| +- CPU Core #2 : 27 49 (/intelcpu/0/temperature/1)| +- CPU Core #3 : 27 48 (/intelcpu/0/temperature/2)| +- CPU Core #4 : 27 52 (/intelcpu/0/temperature/3)| +- CPU Package : 27 54 (/intelcpu/0/temperature/4)+- NVIDIA GeForce GT 630 (/nvidiagpu/0)| +- GPU Core : 28 52 (/nvidiagpu/0/temperature/0)| | +- Fan #1 : 974 1223 (/lpc/nct6776f/fan/0) (rear Fan)| | +- Fan #2 : 1530 1783 (/lpc/nct6776f/fan/1) (CPU heat sink-Fan)The Fractal Case came with 3 fans: rear, top and front.I connected the rear fan to the mobo, the top and front fan to the PSU through the case fan control switch (3 positions: 5v, 7v and 12v). They run at constant speed depending on the switch voltage.Are these temps OK? Feb 18, 2010 30,587 324 107,640 #3 compare them to the one on this software on the sensor parts and if they are the same your fine They look quite similar.The one I was worried about is this one:+- ASUS CM6330_CM6630_CM6730_CM6830_M11AA (/mainboard)| +- Nuvoton NCT6776F (/lpc/nct6776f)| | +- Temperature #2 : min: 94.5 - max: 98.5 (/lpc/nct6776f/temperature/2)These are degrees Celsius. They seem kinda high! Feb 18, 2010 30,587 324 107,640 #4 what hwinfo report on this ? #5 what hwinfo report on this ? The readings from HWInfo show:Nuvoton NCT6776Fmotherboard 31.0 Cauxiliary 95.0 Csystin1 31.0 Csystin2 31.0 Csystin3 31.0 CCPU 29.0 Cis that reading of 95 C normal? Feb 18, 2010 30,587 324 107,640 #6 all the temp are good this auxiliary must be the same thing i have with another name that show -128 c on my system , stay

0 0 Skyrim.esm 1 1 Update.esm 2 2 RaceCompatibility.esm 3 3

C mobo: N/A gpu: amdgpu temp: 49 C Fan Speeds (RPM): N/A Info: Processes: 271 Uptime: 2m Memory: 13.61 GiB used: 926.7 MiB (6.6%) Shell: new-review-test inxi: 3.0.38 linuxium@SER:~$linuxium@SER:~$ df -hFilesystem Size Used Avail Use% Mounted onudev 6.8G 0 6.8G 0% /devtmpfs 1.4G 1.7M 1.4G 1% /run/dev/nvme0n1p5 234G 19G 203G 9% /tmpfs 6.9G 0 6.9G 0% /dev/shmtmpfs 5.0M 4.0K 5.0M 1% /run/locktmpfs 6.9G 0 6.9G 0% /sys/fs/cgroup/dev/loop0 56M 56M 0 100% /snap/core18/2128/dev/loop1 219M 219M 0 100% /snap/gnome-3-34-1804/72/dev/loop2 66M 66M 0 100% /snap/gtk-common-themes/1515/dev/loop4 33M 33M 0 100% /snap/snapd/12704/dev/loop3 51M 51M 0 100% /snap/snap-store/547/dev/nvme0n1p1 96M 31M 66M 32% /boot/efitmpfs 1.4G 20K 1.4G 1% /run/user/1000linuxium@SER:~$linuxium@SER:~$ lsblk -aNAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTloop0 7:0 0 55.4M 1 loop /snap/core18/2128loop1 7:1 0 219M 1 loop /snap/gnome-3-34-1804/72loop2 7:2 0 65.1M 1 loop /snap/gtk-common-themes/1515loop3 7:3 0 51M 1 loop /snap/snap-store/547loop4 7:4 0 32.3M 1 loop /snap/snapd/12704loop5 7:5 0 0 loop loop6 7:6 0 0 loop loop7 7:7 0 0 loop nvme0n1 259:0 0 477G 0 disk ├─nvme0n1p1 259:1 0 100M 0 part /boot/efi├─nvme0n1p2 259:2 0 128M 0 part ├─nvme0n1p3 259:3 0 237.9G 0 part ├─nvme0n1p4 259:4 0 966M 0 part └─nvme0n1p5 259:5 0 237.9G 0 part /linuxium@SER:~$linuxium@SER:~$ sudo lshw -C cpu *-cpu description: CPU product: AMD Ryzen 7 3750H with Radeon Vega Mobile Gfx vendor: Advanced Micro Devices [AMD] physical id: f bus info: cpu@0 version: AMD Ryzen 7 3750H with Radeon Vega Mobile Gfx serial: XXXXXXXX slot: FP5 size: 2268MHz capacity: 4GHz width: 64 bits clock: 100MHz capabilities: lm fpu fpu_exception wp vme de pse. oliver$ ./stress -cpu 3 stress: info: [ ] dispatching hogs: 3 cpu, 0 io, 0 vm, 0 hdd Share. Improve this answer. Follow edited at . Community Bot. 1.

Hamachi 1 0 3 0 - Gratuiciel.com

Quick knowledge first: the PC works using 0 and 1 and it's called a bit (b). It grows untill 8 bit and changes to Byte (B) which is the equivalent to a meter in the SI (International System of Units). Most people use kilo, mega, giga and tera referring to Bytes and the use of Computers, as if they meant multiples of powers of 2, which is WRONG.Wrong form:kilo- = 1 024mega- = 1 048 576giga- = 1 073 741 824tera- = 1 099 511 627 776Correct form (decimal, used for hard drives, DVDs, network speeds, etc):kilo- = 1,000mega- = 1,000,000giga- = 1,000,000,000tera- = 1,000,000,000,000Correct form (binary, used for RAM):kibi- = 1 024mebi- = 1 048 576gibi- = 1 073 741 824tebi- = 1 099 511 627 776Why? Because power works on 0 or 1 as we said before, means 2 as base to decimal index (0, 10, 20, 30...) And not the SI we said before: 10 as base and index times 3 (0, 3, 6, 9...)So meter is 1 then kilometer = 1 000 meters; making you sweat if you run it. May last 10 minutes on it.A byte is 1 then gibibyte (GiB) = 1 073 741 824 Bytes and it can be copied in seconds, making the computer your slave "running" that much.Imagine you could run that for under a tenth of a second... GHz or gigahertz work in the same way, as a PC's CPU. Means doing lots of tasks for in less than a second.