The flash cisco

Booster Performance License for 4430 Series Router for up to 3.4 Gbps CEF* FL-44-BOOST-K9 (=) Booster Performance License for 4450 Series Router for up to 3.8 Gbps CEF* FL-4460-BOOST-K9 (=) Booster Performance License for 4460 Series Router for up to 10 Gbps CEF* * Test results for IP Routing (CEF) @ IMIX Ordering information The Cisco ISR 4000 Family is orderable and shipping. To place an order, refer to Table 9 below and visit the Cisco Ordering Home Page. Table 9. Cisco ISR 4000 Series ordering information Product Name Product Description ISR4461/K9 Cisco ISR 4461 with 4 onboard GE, 3 NIM slots, 1 ISC slot, 3 SM slots, 8 GB Flash Memory default, 2 GB DRAM default (data plane), 4 GB DRAM default (control plane) ISR4451-X/K9 ISR 4451 with 4 onboard GE, 3 NIM slots, 1 ISC slot, 2 SM slots, 8 GB Flash Memory default, 2 GB DRAM default (data plane), 4 GB DRAM default (control plane) ISR4431/K9 ISR 4431 with 4 onboard GE, 3 NIM slots, 1 ISC slot, 8GB Flash Memory default, 2 GB DRAM default (data plane), 4 GB DRAM default (control plane) ISR4351/K9 ISR 4351 with 3 onboard GE, 3 NIM slots, 1 ISC slot, 2 SM slots, 4 GB Flash Memory default, 4 GB DRAM default ISR4331/K9 ISR 4331 with 3 onboard GE, 2 NIM slots, 1 ISC slot, 1 SM slots, 4 GB Flash Memory default, 4 GB DRAM default ISR4321/K9 ISR 4321 with 2 onboard GE, 2 NIM slots, 1 ISC slot, 4 GB Flash Memory default, 4 GB DRAM default ISR4221/K9 ISR 4221 with 2 onboard GE, 2 NIM slots, 1 ISC slot, 8 GB Flash Memory default, 4 GB DRAM default ISR4221X/K9 ISR 4221 with 2 onboard GE, 2 NIM slots, 1 ISC slot, 8 GB Flash Memory default, 8 GB DRAM default For additional product numbers, including the Cisco 4000 Family bundle offerings, please contact your local Cisco account representative. To place an order, visit the Cisco Ordering Home Page. To download software, visit the Cisco Software Center. Integrated Services Router Migration Options The Cisco ISR 4000 Family is included in the standard Cisco Technology Migration Program (TMP). Refer to and contact your local Cisco account representative for program details. Warranty information The Cisco ISR 4000 Series Integrated Services Routers have a 90-day limited liability warranty. Product sustainability Information about Cisco’s Environmental, Social and Governance (ESG) initiatives and performance

The Flexible Flash Controller Properties After you upgrade to the latest verison of Cisco IMC or downgrade to a prior version, and reset the configuration, the server will access HV partition only. Before you begin You must log in with admin privileges to perform this task. Cisco Flexible Flash must be supported by your platform. Note This task results in the host re-scanning all the virtual drives, and a loss of virtual drive connectivity. We recommend that you configure the Cisco Flexible Flash controller properties before using any virtual drives, or power down the host prior to starting this task Procedure Step 1 In the Navigation pane, click the Storage tab. Step 2 On the Storage tab, click Cisco FlexFlash. Step 3 In the Controller Info tab, click Configure Operational Profile. Step 4 In the Operational Profile dialog box, update the following fields: Table 1. Operational Profile Fields for M5 Servers Name Description Controller field The system-defined name of the selected Cisco Flexible Flash controller. This name cannot be changed. Firmware Operating Mode field System displayed message. Displays the firmware operating mode as Mirror. SLOT-1 Read Error Threshold field The number of read errors that are permitted while accessing Slot 1 of the Cisco Flexible Flash card. If the number of read errors exceeds this threshold on a card, the card is marked unhealthy. To specify a read error threshold, enter an integer between 1 and 255. To specify that the card should never be disabled regardless of the number of errors encountered, enter 0 (zero). SLOT-1 Write Error Threshold field The number of write errors that are permitted while accessing Slot 1 of the Cisco Flexible Flash card. If the number of write errors exceeds this threshold on a card, the card is marked unhealthy. To specify a write error threshold, enter an integer between 1 and 255. To specify that the card should never be disabled regardless of the number of errors encountered, enter 0 (zero). Step 5 Click Save. Configuring the Flexible Flash Controller Cards Before you begin You must log in with admin privileges to perform this task. Cisco Flexible Flash must be supported by your platform. Note This task results in the host re-scanning all the virtual drives, and a loss of virtual drive connectivity. We recommend that you configure the Cisco Flexible Flash controller properties before using any virtual drives, or power down the

Number of data lanes of the link. Status column Status of the adapter. Starting Copyback Operation Procedure Step 1 In the Navigation pane, click the Storage menu. Step 2 On the Storage menu, click the appropriate LSI MegaRAID or HBA controller. Step 3 In the RAID Controller area, click the Physical Drive Info tab. Step 4 In the Physical Drives area, select a drive, which is in online state. Step 5 In the Actions area, click Start Copyback. Step 6 A Start Copyback Operation dialog box appears. Step 7 Select the Destination Physical Drive to which the copyback operation needs to be done. Step 8 Click Start Copyback. Step 9 You can also perform the following copyback operations: Pause Copyback - If the drive is in copyback state, you can pause the copyback operation. Resume Copyback- The paused copyback operation can be resumed. Abort Copyback - If the drive is in copyback state, you can abort the copyback operation. Managing the Flexible Flash Controller Cisco Flexible Flash On the M5 servers, Flexible Flash Controller is inserted into the mini storage module socket. The mini storage socket is inserted into the M.2 slot on the motherboard. M.2 slot also supports SATA M.2 SSD slots. Note M.2 slot does not support NVMe in this release. Some C-Series Rack-Mount Servers support an internal Secure Digital (SD) memory card for storage of server software tools and utilities. The SD card is hosted by the Cisco Flexible Flash storage adapter. The SD storage is available to Cisco IMC as a single hypervisor (HV) partition configuration. Prior versions had four virtual USB drives. Three were preloaded with Cisco UCS Server Configuration Utility, Cisco drivers and Cisco Host Upgrade Utility, and the fourth as user-installed hypervisor. A single HV partition configuration is also created when you upgrade to the latest version of Cisco IMC or downgrade to the prior version, and reset the configuration. For more information about installing and configuring the M.2 drives, see the Storage Controller Considerations (Embbeded SATA RAID Requirements) and Replacing an M.2 SSD in a Mini-Storage Carrier For M.2 sections in the Cisco UCS Server Installation and Service Guide for the C240 M5 servers at this URL: For information about the Cisco software utilities and packages, see the Cisco UCS C-Series Servers Documentation Roadmap at this URL: Card Management Feature in the Cisco Flexible Flash Controller The Cisco Flexible Flash controller supports

Host prior to starting this task. Procedure Step 1 In the Navigation pane, click the Storage tab. Step 2 On the Storage tab, click Cisco FlexFlash. Step 3 In the Actions area, click Configure Cards. Configure Cards dialog box appears. Step 4 In the Configure Cards dialog box, update the following fields: Name Description Mode field Displays the mode type as Mirror. Mirror Partition Name field The name that you want to assign to the partition. Auto Sync checkbox If selected, data from the selected primary card syncs automatically with the secondary card. Note There must be two cards for you to choose this option. If this option is selected, data on the secondary card is erased and overwritten by the data on the primary card. The status of this is displayed under the Virtual Drive tab. Select Primary Card drop-down Slot that you want to set as the primary card. This can be one of the following: Slot1 Slot2 Virtual Drive drop-down The virtual drive type. This can be one of the following: Removable Non Removable Step 5 Click Save. The cards are configured in the chosen mode. Resetting the Flexible Flash Controller In normal operation, it should not be necessary to reset the Cisco Flexible Flash. We recommend that you perform this procedure only when explicitly directed to do so by a technical support representative. Note This operation will disrupt traffic to the virtual drives on the Cisco Flexible Flash controller. Before you begin You must log in with admin privileges to perform this task. Cisco Flexible Flash must be supported by your platform. Procedure Step 1 On the Storage Adapters pane, click Cisco FlexFlash. Step 2 In the Cisco FlexFlash pane, click the Controller Info tab. Step 3 In the Actions area, click Reset FlexFlash Controller. Step 4 Click OK to confirm. Enabling Virtual Drives Before you begin You must log in with admin privileges to perform this task. Cisco Flexible Flash must be supported by your platform. Note This task results in the host re-scanning all the virtual drives, and a loss of virtual drive connectivity. We recommend that you configure the Cisco Flexible Flash controller properties before using any virtual drives. Procedure Step 1 In the Navigation pane, click the Storage tab. Step 2 On the Storage tab, click Cisco FlexFlash. Step 3 Click the Virtual Drive Info tab. Step 4 In the Virtual Drive

C:\>snmpset -v 1 -c private device name> .1.3.6.1.4.1.9.9.96.1.1.1.1.2.Random number> integer 1 .1.3.6.1.4.1.9.9.96.1.1.1.1.3.Random number> integer 4 .1.3.6.1.4.1.9.9.96.1.1.1.1.4.Random number> integer 1 .1.3.6.1.4.1.9.9.96.1.1.1.1.5.Random number> ipaddress "server ip address>" .1.3.6.1.4.1.9.9.96.1.1.1.1.6.Random number> octetstring "file name>" .1.3.6.1.4.1.9.9.96.1.1.1.1.14.Random number> integer 4 C:\>snmpwalk cognac .1.3.6.1.4.1.9.9.96.1.1.1.1.10 C:\>snmpset -v 1 -c private device name> .1.3.6.1.4.1.9.9.96.1.1.1.1.14.Random number> integer 6 Complete these steps to use the CISCO-FLASH-MIB to copy a configuration file located on a TFTP server to Flash on your router: C:\>snmpset -v 1 -c private device name> cisco.ciscoMgmt.ciscoFlashMIB.ciscoFlashMIBObjects.ciscoFlashOps.ciscoFlashCopyTable.ciscoFlashCopyEntry.cisco FlashCopyCommand.666 : INTEGER: copyToFlashWithoutErase cisco.ciscoMgmt.ciscoFlashMIB.ciscoFlashMIBObjects.ciscoFlashOps.ciscoFlashCopyTable.ciscoFlashCopyEntry.cisco FlashCopyProtocol.666 : INTEGER: tftp cisco.ciscoMgmt.ciscoFlashMIB.ciscoFlashMIBObjects.ciscoFlashOps.ciscoFlashCopyTable.ciscoFlashCopyEntry.cisco FlashCopyServerAddress.666 : IpAddress: 172.17.246.205 cisco.ciscoMgmt.ciscoFlashMIB.ciscoFlashMIBObjects.ciscoFlashOps.ciscoFlashCopyTable.ciscoFlashCopyEntry.cisco FlashCopySourceName.666 : DISPLAY STRING- (ascii): test_file.txt cisco.ciscoMgmt.ciscoFlashMIB.ciscoFlashMIBObjects.ciscoFlashOps.ciscoFlashCopyTable.ciscoFlashCopyEntry.cisco FlashCopyDestinationName.666 : DISPLAY STRING- (ascii): flash:/test_file.txt cisco.ciscoMgmt.ciscoFlashMIB.ciscoFlashMIBObjects.ciscoFlashOps.ciscoFlashCopyTable.ciscoFlashCopyEntry.cisco FlashCopyEntryStatus.666 : INTEGER: createAndGo You can find an overview of the OIDs used in the CISCO-CONFIG-COPY-MIB at: You can find an overview of the OIDs used in the CISCO-FLASH-MIB at: ftp://ftp.cisco.com/pub/mibs/oid/CISCO-FLASH-MIB.oid. You can read complete MIB information from the MIBs you downloaded. Read the MIB for other options (for example, if you want to use RCP instead of TFTP). Related Information Technical Support & Documentation - Cisco Systems

As optional. Procedure Step 1 Use the show file systems command to display the Flash memory cards that are available on your CMTS, along with the free space on each card and the appropriate device names to use to access each card. Most configurations of the Cisco CMTS platforms support both linear Flash and Flash disk memory cards. Linear Flash memory is accessed using the slot0 (or flash ) and slot1 device names. Flash disk memory is accessed using the disk0 and disk1 device names. For example, the following command shows a Cisco uBR7200 series router that has two linear Flash memory cards installed. The cards can be accessed by the slot0 (or flash ) and slot1 device names. Example: Router# show file systems File Systems: Size(b) Free(b) Type Flags Prefixes 48755200 48747008 flash rw slot0: flash: 16384000 14284000 flash rw slot1: 32768000 31232884 flash rw bootflash:* - - disk rw disk0: - - disk rw disk1: - - opaque rw system: - - opaque rw null: - - network rw tftp: 522232 507263 nvram rw nvram: - - network rw rcp: - - network rw ftp: - - network rw scp:Router# The following example shows a Cisco uBR10012 router that has two Flash disk cards installed. These cards can be accessed by the disk0 and sec-disk0 device names. Example: Router# show file systems File Systems: Size(b) Free(b) Type Flags Prefixes - - flash rw slot0: flash: - - flash rw slot1: 32768000 29630876 flash rw bootflash:* 128094208 95346688 disk